Skip to content

MeshCore 1.18.0.2 - USA Cascade

These notes describe changes from 1.18.0.1; board and role support varies.

Firmware picker | Update guide | Features beyond mainline in 1.18.0.1 | Full change history

New and improved

  • Easier LoRa firmware updates: the browser updater can prepare compatible radios and select an update channel automatically. Older firmware may need a compatibility mode.
  • Optional rotary controls: supported devices can use a rotary encoder, with configurable pins for supported external controls and indicators.
  • Seven-day high and low readings: get telemetry.minmax reports temperature and battery-voltage history around each day's extremes.
  • More nRF52 bootloader options: selected Repeater and Room images include the matching OTAFIX bootloader. Additional board-specific images use an untested preview bootloader; see board details.
  • Radio2 switching: supported ESP32 boards use faster radio switching; actual timing and reception depend on the board and settings.

Fixed

  • W12 radio changes: configured radio settings apply after the reply delay instead of requiring a reboot. W12 also gains frequency calibration controls.
  • WiFi setting: turning WiFi off persists across reboot. The web interface has its own separate setting.
  • SX1262 reception: AGC protection is enabled on supported SX1262 boards and retained across radio sleep.
  • 33 dBm radio modules: board-specific drive limits and variants address incorrect power settings on supported external-amplifier boards.

Choosing and installing firmware

Use the firmware picker to find the exact board and role. The release includes the additional board-specific variants from the nRF52 bootloader preview; their included bootloader remains a preview and has not been physically tested.

Choose the exact board and role. On ESP32, an app-only update requires a compatible partition layout. On nRF52, ordinary images keep the installed bootloader; images marked with bootloader carry a matching update. Recognized compatible bootloaders are checked after startup. See the update guide and bootloader guide.

Fresh USA Cascade defaults are 910.525 MHz / BW62.5 / SF7 / CR5. Saved radio settings take precedence.

Testing and limits

The consolidated firmware passed build, memory, package and checksum checks. Hardware coverage varies; the seven additional nRF52 board families in the bootloader preview have not been physically tested by this project.

  • ThinkNode M4, ThinkNode M8 and Wio WM1110 Dev Kit do not have a bundled OTAFIX image in this release.
  • Muzi Base stock bootloaders are not automatically replaced; the preview instructions describe the local route.
  • Radio2 profiles share a radio; simultaneous reception is not guaranteed.

Most firmware uses source a723af94. The additional nRF52 bootloader-preview images use 9d961a19.